About

Welcome readers and new readers who would like to know more about Anodizing of Aluminum. Do you wonder why I have started this blog and what exactly my qualifications are?


My answer is that I have formal qualifications. I am an expert, a doctor and a consultant. I do consultant work and give seminars. I have published a PhD thesis and lots of papers about Anodizing.

Over the last decade I have accomplished a lot, worked in an Anodizing Job shop and started my own consultant company, AluConsult.

Here’s what I’ve done since my life with Anodizing started in February 1993 after graduating as a Civil Engineer:

First experience with surface treatment of aluminum was when I worked as an Research Assistant at the Technical University of Denmark with all kinds of surface treatment of aluminum.

Expanding my knowledge theoretical when I started my PhD work about Pulse Anodizing of Extruded and Cast aluminum alloys in April 1994.

Using and expanding my knowledge further during my three years as the Quality - and Development manager at the largest anodizing company in Denmark in 1999.

Finally free and ready to help the world as owner of my own consulting company in the Summer 2002, AluConsult.

I am a board member of the Aluminum Anodizers Council and member of the International Hard Anodizing Association.

If you want to know more about Anodizing this is the place to go.

Read more:__Why Anodizing

Start here:__ The Beginner’s Guide to Anodizing World - A Guided Tour

Contact Info

The Danish Technological Institute
Kongsvangs Alle 21
8000 - AArhus, Denmark

Cell: +45 2423 9145
ajuh@teknologisk.dk

__________________________________________________